top of page


When you're ready to part your work from your stock, reach for our Easy Parting Tool™! It's safer, steadier, and like all our Easy Wood Tools, has a replaceable carbide cutter.

Our 2nd generation Easy Parting Tool™ cuts clean, provides precise and stable control, with a flexible approach for side cutting and undercutting techniques. This tool comes with a replaceable stainless steel cutter blade that contains a permanent mounted Negative Rake Carbide Cutter for smooth, clean parting through all materials, with no sharpening required. The improved reach of this tool allows for bigger projects up to 5" diameter, while still offering stable control. 


Handles are one-of-a-kind grained American Maple with a copper ferrule that gives strength and comes with an installed replaceable Negative Rake Carbide Cutter Blade and includes a 5/32" standard hex key that makes changing the cutter blade quick and easy.

Handle: 14"

Cut Width: 1/8"

Blade Length: 2 1/2"

Maximum Part Off Diameter: 5"

Overall Length: 19"


Made in America

PT150 Close Up Round.png
PT150 Extreme Close Up round.png

Negative Rake Cutter Blade is engraved with corresponding replacement part number, so it’s easy to know the item when it's time to replace!

Parting Tool Come with a Negative Rake Carbide Cutter Blade:

  • Pi160 replacement NR Cutter Blade

* The Pi160 replacement NR Cutter Blade will only work with the 2nd Generation 1/8" Parting Tool. The Original 1/8" Parting Tool accepts the Pi1 replacement standard cutter.

Our high quality lathe turning tools make turning safer, faster, and more fun! Whether you're a newbie or a pro, we have the best tools for your next project.

  • Easy to use: Unlike traditional steel, our carbide-tipped tools are always held flat on the rest and parallel to the floor. No bevels, no vertical angles to worry about.

  • Short learning curve: Cut left, right, or straight on, and you're successfully and safely turning within minutes of picking up the tool. 

  • Our own carbide: We manufacture our carbide cutters using a proprietary recipe to make them the hardest, sharpest, and longest lasting in the business.

  • Lower cost of ownership: All you need is a lathe and an Easy Wood Tools turning tool and you can start making. You don't need to buy a grinding kit or sharpening system or multiple tools to achieve your desired result.

  • No sharpening: Never sharpen your tools again! When one side of the cutter gets dull, just rotate it to a new surface. When you've used all the sides, simply replace it with a new cutter. 

  • Safer: Our square tool bar design and resultant turning geometry means fewer catches and kick-backs.

  • Unique Handle Design: Our unique handle design puts turning pressure into the tool rest so you don't tire as quickly, with two natural hand positions for greater comfort.

  • Handmade in America: Our team of highly skilled men and women use time-tested techniques and American-sourced woods, metal, and carbide to make our high quality tools.

  • We focus only on turning: EWT sells ONLY turning tools and accessories, so we know how to make turning safer, easier, better, and more fun.​

bottom of page